Rebuilding A Robinson R22 Helicopter Part 3

30 lug 2020
893 908 visualizzazioni

This is getting more and more insane! As we dig into this Robinson Helicopter, we discovery some pretty crazy things. We are learning so much and we couldn't be more happier to get one step closer to getting a pilots license. However, we still got a good bit to go to get this beast overhauled, but when its complete thats when well experience some freedom flying. We cant wait to get this helicopter complete! Thanks For Watching!!!
-P.O. Box 37
Rossville,GA 30741
-Music credits:
Song: ROFEU - Midnight Lover
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link:
Song: Thomas Gresen - Good Pace
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link:
Song: LiQWYD - It Will Be Ok
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link:
Song: MBB - Summer
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link:
Song: Marin Hoxha & Clasio - Spirit
Music provided by Vlog No Copyright Music.
Video Link:
Song: MusicbyAden - Happy
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link:
Song: Sappheiros - Truth
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link:

  • Are you guys still going make video of helicopter?

    Aidan WilsonAidan Wilson12 giorni fa
  • When are you going to start restore the helicopter again? :)

    markus gobergmarkus goberg17 giorni fa
  • Your very lucky to have your own r22 and to work on it I have trying to get my helicopter flying licence for many years although I would not choose a robinson due to its 12 year 2200 hour strip down I would choose either a enstrom f28A or a Hiller uh 12 b or C or any Hiller/as both makes plus the Hughes /Schweizer 300c all have either on condition parts or no Callander time parts, enstrom have only 1 Callander time life part and just 9 over haul parts they just get replaced when they're running time hours are up so it means a enstrom could be flown up to 20 to 30 years before any heavy costs and replacement parts are needed, all best from Peter in the UK

    peter rowcliffepeter rowcliffe18 giorni fa
  • Why does the shirt say 2015.

    Tate GoffTate Goff22 giorni fa
  • You need an FAA A and P mechanic with you every step of the way on this. That guy that sold you this thing probably didn't clue you in on what you were getting yourselves into.

    bellboy407bellboy40724 giorni fa
  • Bet the Squad saved a ton of money by doing all that work themselves. Plus the educational value is priceless!

    SkyBaumSkyBaum29 giorni fa
  • When the part 4 it will come ?

  • What happened to this build ? Was it put on the shelf for a while ?

    L ZedL ZedMese fa
  • I watch this feed so I can remember how to be YOUNG and wide eyed, thank you

    Roger GonsoulinRoger GonsoulinMese fa
  • a motor like that is used on airboats, my father in law has one on his!

    Ethan MacherasEthan MacherasMese fa
  • Outch. My flight engineer stomach turned at 7:58. You do not want to use a wrench on a aircraft. And most definitely you DO NOT want tools to touch components like the gearbox. Not even making a small mark. Before you know it you have a micro crack in the casting. Even the smalest mark on a gearbox usually means blending out shot peen and Eddy current testing. And 10:25 removing cotter pin it leaves a mark on the tail shaft component. Power tools usually a no-no for anything but panels etc. You want to feel the things you disassemble so you may pick up potentially problems with the threads or bindings. Big different between car and a helicopter: A car is made as stirdy as it needs to be. A helicopter is made as flimsy as it needs to be...

    Jan E. LohneJan E. LohneMese fa
  • Check playlist of some older builds:

  • So what this series is over now?

    Jonny 6631Jonny 6631Mese fa
  • Where is the helicopter

    Jovan no pasa nadaJovan no pasa nadaMese fa
  • part 2 is not available in Denmark 🥺🥺

    Rasmus NielsenRasmus NielsenMese fa
  • 🔥🔥🔥🔥🔥🔥🔥

    Jair RamosJair RamosMese fa
  • Bone Apple teeth 😂

    Lildarkcar177Lildarkcar177Mese fa
  • This must be called next level goonzquad . I like it.

    Alphanoss GibsonAlphanoss GibsonMese fa
  • When we going to see more helicopter episodes? John from uk

    John DaviesJohn DaviesMese fa
  • TRUMP 2020

  • Either you wear a mask properly or dont wear it at all. And if a shop has a mask requirement, wear it properly. Not to sound like a cop but that shit really does decrease the chance of YOU catching the virus and also of you accidentally spreading it to some old grandma who might die from it by like 90%

    CaptainCaptainMese fa
  • In the next build "We put on a Army Trex 4 inch exhaust system and a protech supercharger. no way!!!! duuudeeee. and were just gonna send it to the moon" R-22 woooooooooopshhhh

    Highstakes187Highstakes187Mese fa
  • where are the next part of the helecopter

    Ricardo SouzaRicardo Souza2 mesi fa
  • You guys are crazy!😍

    gta5 finder memegta5 finder meme2 mesi fa
  • I thing It will be a goonzquad air controol

    P Jagadishwar 2026-27HP Jagadishwar 2026-27H2 mesi fa
  • Next is rebuilding the crashed planes from 911

    That1-_-guy.That1-_-guy.2 mesi fa
  • Hope you got life insurance cause if that thing fails....

    Sonykurupt GamingSonykurupt Gaming2 mesi fa
  • 3 years later "Rebuilding the Falcon 9"

    FillaaaaaFillaaaaa2 mesi fa
  • The R22 helicopter shirt is sick!

    Jackson CollinsJackson Collins2 mesi fa
  • I’m loving this series and can’t wait to see how it turns out!

    Wesley DeckerWesley Decker2 mesi fa
  • You talk talk talk talk talk and talk ... and finally get to the point 😊

    ster88ster882 mesi fa
  • Do you not need an a&p to document and sign off on that aircraft ?

    \Dylan \Randolph\Dylan \Randolph2 mesi fa
  • How about doing a can am spider to see what you guys can do with it

    Gale ConnorsGale Connors2 mesi fa
  • Imagine you have a rust hole in the exhaust and you turn on the heat and it starts blowing exhaust inside the cockpit!

    GraepixelsGraepixels2 mesi fa
  • Goonsquad boys, If you can contact me I have a proposal for you that I know you will be interested in. Message me

    James GlassJames Glass2 mesi fa
  • You pretty much have a volkswagen beetle engine and heater assembly in your helicopter.

    Bobdingle25Bobdingle252 mesi fa
  • Im also FAA AMT, whos going to sign off all your repairs?

    R. GuthrieR. Guthrie2 mesi fa
  • “ 🦴 🍏 🦷 “ 🤪🤣

    AwoL_ BrutalAwoL_ Brutal2 mesi fa
  • One of my oldest friends dad used to rebuild crashed helikopters. Mainly Hughes H-500. We used to hang in his hangar. This is AWESOME! Brings back so many memories!

    BalleknackBalleknack2 mesi fa
  • Mustang 🧐

    Nobdoy IndustriesNobdoy Industries2 mesi fa
  • “Gotta eat healthy “ First thing they see is cake and take four

    Ricardo DiazRicardo Diaz2 mesi fa
  • Pops Rocks!!!

    Charles LinvilleCharles Linville2 mesi fa
  • You need a A&P mechanics license from the FAA to rebuild these things. Unless, it's an experimental aircraft. Then you have to follow a bunch of regulations for experimental aircraft. Aircraft are highly regulated.

    Bradley TordoffBradley Tordoff2 mesi fa
  • Iam assuming you have a A&P supervising you guys and willing to sign it off probably need a IA also excellent work love all of the videos

    jdhiner1jdhiner12 mesi fa
  • As a pilot, no offense I would never fly in this or suggest anyone actually ever do.

    TheNorthernAviatorTheNorthernAviator2 mesi fa
  • It's been a few weeks now so hopefully some of those parts have already been shipped out and are soon going to make their return!

    Octane Street - Apprentice MechanicOctane Street - Apprentice Mechanic2 mesi fa
  • When are you coming out with part 4?!?

    Jake PlayzJake Playz2 mesi fa
  • Um, don't you need someone with a A&P License to do this work, legally?

    Nathan BerryNathan Berry2 mesi fa
  • Just the fact that you guys are using an adjustable wrench to disassemble this entire thing suggests you might not be the right people to be doing this. This is life or death guys, not the realm for adjustables and duct tape!

  • Hey guys love watching this build makes me want to do it with a 22/44/66. I too am a a&p mechanic and you guys need to get you some ignition wrenches specifically a 7/32 for the r22 baffle nuts makes things way easier I do forget the size of the transmission bolts but for reinstallation I highly recommend getting the correct size wrench for the head of the bolt when you torque the nut to Robinson heli torque specs. Can’t wait to see more. Fun watching.

    joshua carverjoshua carver2 mesi fa
  • 7:18

    Fadan Nasir GAMINGSFadan Nasir GAMINGS2 mesi fa
  • DANG!!! DUDE!!!!

  • Man I don't like this at all. Shit ain't safe.

    andrew colemanandrew coleman2 mesi fa
  • Next video - Buying a Robinson R22 for parts.. Bone Appleteeth errone!

    sonataarctica1979sonataarctica19792 mesi fa
  • 6:53 no ones ghonna talk about how my mans said we got our vegetables im dead

    Mr sweatMr sweat2 mesi fa
  • The IA must have some sized gonads signing off these 2 goons work.

    Betty SwollocksBetty Swollocks2 mesi fa

    Tim MitchellTim Mitchell2 mesi fa
  • Learn how to wear a mask ffs. It's not effective if it's not covering your nose. This isn't hard.

    P MP M2 mesi fa
  • Hmmm dont mind me just casually lifting a helicopter 1:51

    Seo3738Seo37382 mesi fa
  • Too much for me, I sure don’t want to be flying that. I know it’s it’s just nuts and bolts but I got lost with everything you guys took off

    Slackerz SincitySlackerz Sincity2 mesi fa
  • Take note of all serial numbered parts that you send out. good to keep for your records & logbook.

    B6jfkmxB6jfkmx2 mesi fa
  • you'll wanna invest in buying safety wire pliers for when you guys start putting things back together. SK/Snap on make good ones. Get the fully reversible one.

    B6jfkmxB6jfkmx2 mesi fa
  • Paint the helecopter in jeep red and white goonsquad logo

    Sanchita Naik gaonkarSanchita Naik gaonkar2 mesi fa
  • Paint the helecopter in jeep red and white goonsquad logo

    Sanchita Naik gaonkarSanchita Naik gaonkar2 mesi fa
  • These thing fly and then fall and you suddenly feel like hard is the Earth when you fall on it.

    pangrac1pangrac12 mesi fa
  • Really nice quality video keep going boys

    Alireza SadeghiAlireza Sadeghi2 mesi fa
  • At 9:55 you pulled up a joint and exposed some yellow material, this is called mastinox or "nastyinox" (spelling) never let that touch your skin, its very carcinogenic. But is a wonderful rust inhibitor.

    Midwest MachinesMidwest Machines2 mesi fa
  • Isn’t there any regulations in America about rebuilding these things?In Australia you have to bean air engineer at the minimum.

    terry reevesterry reeves2 mesi fa
    • @Chuck Croston I agree totally, my first thoughts were of the FAA and Robinson Helicopter Company. 🤷‍♂️

      Eddie SmithEddie Smith2 mesi fa
    • @Eddie Smith Glad to hear they have someone helping even if they are not being shown. TBH, I am surprised the FAA has not jumped all over them for this. I personally think they need to be more open with what is required for this type of thing and the fact that a garage mechanic is not going to be able to rebuild something like this in a garage for the most part.

      Chuck CrostonChuck Croston2 mesi fa
    • @Chuck Croston Absolutely correct but, behind the scenes the guys are being supervised and guided with one of the top Robinson Factory certified rebuilders on the entire east coast. I know nothing about these guys but I personally know the one supervising the rebuild and you can rest assured it will be done to factory specs. (P.S. I asked questions about this myself and was informed of the above).

      Eddie SmithEddie Smith2 mesi fa
    • Yes, there are plenty of regulations and they are violating plenty with what they are doing as neither of them are A&P's and they do not have a clue as to what they are doing. In cars, that does not matter but this is a whole different kind of thing they are trying to get into.

      Chuck CrostonChuck Croston2 mesi fa
  • the parts

    Scp-096Scp-0962 mesi fa
  • i see why they no make a part 4

    Scp-096Scp-0962 mesi fa
  • oooooooh

    Scp-096Scp-0962 mesi fa
  • part 4?

    Scp-096Scp-0962 mesi fa
  • vox

    Daily FUTDaily FUT2 mesi fa
  • Careful you guys. Either use austenitic steel for the custom bracket, or paint the other one. You risk to induce ferritic material into the transmission housing and make it corrode real quick!

    Music is LifeMusic is Life2 mesi fa
  • Bone apple teeth man!. new shirt?

    Muteb AlmansourMuteb Almansour2 mesi fa
  • 1.8K Helicopter Pilots dislike this video.....

    Ben KuehlBen Kuehl2 mesi fa
  • Where did y'all get that skrimp Steamer?

    WurmpoolWurmpool2 mesi fa
  • boneAppleTeeth, man....... such a meme...hehe

    Will ArungaWill Arunga2 mesi fa
  • Boys, boys boys........... complete a very good pilot's course before you even flip the first switch on that thing. Twist and turn=crash and burn.

    Fern NrefFern Nref2 mesi fa
  • I cannot believe the FAA would let this fly. Neither one of the goonsquad has an A&P license which is required to work on aircraft. Any FAA inspector wold refuse to give this a flight certificate.

    william rcmtwilliam rcmt2 mesi fa
  • Great Job fellows. Also thank you for keeping it clean and G rated. Thanks for the great video. I love how you just dive in and figure it out as you go. I've done that on alot of my projects through the years and learned so much.

  • My mom used to yell at me for leaving my socks all over the place, does your mom get pissed about you leaving your cars everywhere?

    Joe TuckerJoe Tucker2 mesi fa
  • Yup been a helicopter mechanic for 25 years and Robinson’s a horrible little thing to work on. Stop the build and sell the parts just walk away.

    jeep guyjeep guy2 mesi fa
  • Some operators put an extra alternator belt on before they reinstall the clutch/ drive assembly. There is a way to tywrap the spare belt out of the way of the rotating flywheel. It saves a lot of time when the original belt breaks or wears out before TBO. You need to have that exhaust system sent out for overhaul too. If a crack develops in the heat muff area, not only will it keep your toes warm, it will put you to sleep...maybe permanently.

    I.R. WayrightI.R. Wayright2 mesi fa
  • It reminds me of an air cooled VW including the heater.

    Steve McluckieSteve Mcluckie2 mesi fa
  • Mazda rx7 is the strongest engine ever 🤙🏼

    michael nnielsenmichael nnielsen2 mesi fa
  • It’s a rotary engine like Mazda rx6-8

    michael nnielsenmichael nnielsen2 mesi fa
  • Is the helicopter yours

    Cameron TurnerCameron Turner2 mesi fa
  • I love to sound that the jeep makes

    Junmarion NixJunmarion Nix2 mesi fa
  • Daaaaaaaang son! Can't wait to see you guys install the Armytrix exhaust on that R22. It's going to sound soooo sick! LOL

    Steve126aSteve126a2 mesi fa
  • Bros careful with that stuff man please enjoy it but be very careful.

    Jeff KakashiJeff Kakashi2 mesi fa
  • Can not wait to see more and more of the forklift

    John WaltersJohn Walters2 mesi fa
  • Are you filming at your house or workshop

    ARCHIE sweatsARCHIE sweats2 mesi fa
  • "Bone apple teeth Man!" LOL!

    if66was99if66was992 mesi fa
  • Wait it's a boxer engine awesome

    Subi DriverSubi Driver2 mesi fa
  • Coconut 😍😍... coconut tree kerala"s official tree.. Welcome to india

    BIJU P FBIJU P F2 mesi fa
  • Rerun...

    Joey JaquezJoey Jaquez2 mesi fa
  • His hand movements are funny...

    izzy 706izzy 7062 mesi fa
  • Ouch, using an adjustable wrench on an aircraft.....sinners !!

    r lr l2 mesi fa
  • Howhl cooler :)

    Matt TMatt T2 mesi fa